Textile Sewing Machine Standard Operating Procedure

 Sewing Machine Standard Operating Procedure (SOP)

 

 Sewing Machine: 

A sewing machine takes string from two sources, the spool and the bobbin, and weaves them together as the needle goes through the material.

• Responding Movement

The all over movement of the sewing machine needle is a wellspring of

responding movement. The needle could grasp free dress, hair, or extremities

which could bring about extreme injury. The needle's sharp end could likewise cause

genuine damage to body or attire.

•  Punching

The punching activity of the sewing machine is performed by the responding

movement of the needle. The speedy punching activity could cause genuine injury in the event that one

is excessively near the movement occurring. The punching activity could likewise create a

limited quantity of residue relying upon the work piece material.

Control Plan:

•  Peruse and get comfortable with machine's working methods prior to working
•  Consistently know where the force off switch is situated if there should be an occurrence of crisis
•  Consistently wear security glasses while working this machine
•  Machine ought to consistently be off when not being used
• Consistently detach the machine from the force source prior to overhauling, fixing, ormaking any changesDon't wear gloves, tie, gems, or free attire, as they could get found out in the responding components of the machine
• Consistently keep face and some other limbs a protected separation away from the needle when in activity
• Tie up long hair or wear defensive hair covering to keep hair from getting found out in the responding components of the machine. 

 

• Exploratory Systems:

 

• Put on all well being hardware and tie back free hair or apparel prior to working
• Check to ensure all pieces of machine are working and working appropriately
• Set up work piece for sewing, ensure sewing way is unmistakably apparent
• Set up sewing machine with right needle, string, and wanted sewing (design choices situated on front face of machine)
• When prepared, turn on sewing machine
•  Use foot pedal to control speed of needle in activity

•  Sew work piece along wanted way while getting hands a protected distance far from the needle When completed, turn off sewing machine
• Turn off the machine, clean it, and set it back in the wardrobe in its proper area  
• Clean work area on a case by case basis
  

For different requests, see the Client Manual in Addendum. 

 

Squander The board Methodology:

When gotten done with this machine, in every case clean the region if important. Paper towels and cleaning

arrangement can be found in G217-11.

Spot all materials back in the fitting spot.

Spill and Mishap Methodology:

On the off chance that a mishap happens, report quickly to the lab boss (G217-05) or other proper

staff part. On the off chance that nobody is near, dial 911 on the landline telephone close to the entryway of G217-11 to

arrive at the grounds police. The lab emergency treatment pack is situated on the divider close to the sink. A medical aid

leaflet from DEHS is situated in all of the MDC's medical aid